Standard Technician Tool List

Please note: We have a complete Tool List (without the pictures) at the end of this page. Also the actual item may vary from the picture. In addition we have complete specific Tool Sets available upon request. Please email any questions to divelab@divelab.com

Tool Kit w/Pouch

For 17B, 17C, 27, 17K, KM 37SS, KM37, KMB 18/28
Part Number: 525-620

Tool Kit w/Pouch

For KM-77 and KM-47
Part Number: 525-768

EXOBR Tool Kit w/Pouch

Part Number: 325-630

Tool Kit w/Pouch

For KM 97 & 455 Reg

Part Number 525-630

Torque Wrench

50-250 in LBS
Part Number: T-06227987

10 Piece Crowfoot Wrench Set

3/8″ – 1″
Craftsman
Part Number: T-4362

Torque Screwdriver

5-40 in LBS and 4-27 NM
Part Number: T-401SMCDI

1/4″ Flat Blade

Attachment for Torque Screwdriver
Part Number: T-FB-att-1-4

#2 Phillips

Attachment for Torque Screwdriver
Part Number: T-Phl-att-2

7/64″ Allen Wrench

Attachment for Torque Screwdriver
Part Number: T-Att-7-64

9/64″ Allen Wrench

Attachment for Torque Screwdriver

Part Number: T-Att-9-64

5/32″ Allen Wrench

Attachment for Torque Screwdriver
Part Number: T-Att-5-32

Pull Pin O-Ring Seating Tool

Part Number: DL-PP-FT

3/32″ Pin Punch

Proto Brand
Part Number: T-02623544

Brass Hammer

Part Number: T-06623805

Regulator Nut Socket

Part Number: 525-625
Note: This piece is included in Part# 525-620

Allen Wrench 9/64

Bondhus, Pull pin long
Part Number: T-05054093

Allen Wrench 9/64

Part Number: T-Std-Allen

3/8″ Drive Ratchet

Part Number: T-D809440

Extension for Ratchet 6″

Part Number: T-EXT-6IN

Nut Driver 3/8″

for Pull Pins

Part Number: T-ND-3-8

Nut Driver 1/4″

for Pull Pins

Part Number: T-ND-1-4

Pliers-CirClip-Int-Ext

Part Number: T-08100265

11 Piece Set Stubby Combo Wrench Set

3/8″ – 1″

Part Number T-9930

10 Piece T-Handle Hex Key Wrench Set

3/32″ – 3/8″
Part Number: T-2546

O-Ring Picks

Bronze Tips
Part Number: T-TL111

Spanner Wrench

For Scuba 1st Stage 3/4″ – 2″
Part Number: T-TL118

7/8″ Thin Wrench Proto

Part Number: T-3528

1/4″ – 1-1/8″ Wrench Set

Part Number: T-68805

7/16″ Deep Socket

3/8″ Drive
Part Number: T-45386

Crescent Wrench Set

6″, 8″, and 10″
Part Number: T-93943HF

0-1/4″ T-Handle Tap Wrench

Part Number: T-Tap

6-32 Hand Tap

4-Flute for Stainless Steel Helmet Snaps
Part Number: Tap-6-32

8-32 Hand Tap

4-Flute for Face Port Insert
Part Number: T-04417333

10-24 Hand Tap

4-Flute for Face Port Tap on Stainless Steel Helmets
Part Number: Tap-10-24

Tweezers

Part Number: T-Tweezers

1/4″ Flat Blade “Stubby” Screwdriver

For Side Block Alignment Screw
Part Number: T-FB-Driver

Flat Blade Screwdriver

Part Number: T-FB-3-8

Phillips Screwdriver

Part Number: T-Phl-8

Needle Nose Pliers

Part Number: T-NS-pl

Flush Cutters

Part Number: T-200-002

Metal Scribe

Part Number: T-Scribe

Putty Knife

1″ Wide
Part Number: T-PK

Acid Brushes

Part Number: T-Acid Brush

Brass Brush

Part Number: T-09301680

Regulator In-Line Shut Off

2nd Stage

Part Number: T-HL-404-DLX

Helmet Blanking Plate

Part Number: DL-BP

“EZ” QD Adapter

Part Number: T-AC900

(goes with T-AC380)

Intermediate Pressure Gauge

Part Number: T-AC380

Flow Meter

Range 200-1400 LPM for Umbilical Flow Testing
Part Number: T-200-1400

EXO Tool/Puck Kit

Part Number: DL-EXO-kit

Regulator In-Line Adjuster

Part Number: T-TL121

Dive Lab Test Block

Part Number: T-TB

Pelican Case

with Mesh Lid Organizer

Part Number: T-1510 w/lid organizer

Christo Lube

2 oz. O2 Compatible
Part Number: T-CL

Valve Lubricant & Sealant

Molykote from Dow Corning
(Also known as Dow Corning 111)

Part Number: T-111

Tribolube 71

2 oz. Tube, Oxygen Compatible
Part Number: T-PC71-9721

Tribolube 2080 Light

4 oz. Tube, Silicone Grease
Part Number: T-PC2080L97254T

Loctite Stick

Blue / Medium
Part Number: T-Loc248

100% Silicone RTV

3 oz. Tube
Part Number: T-RTV

Silicone Oil

(Dow Cornning 550R)

1 oz with syringe, NO O-rings

Part Number: 520-008-1

Silicone Oil

(Dow Cornning 550R)

2 oz with syringe, NO O-rings

Part Number: 520-008-2

Kirby Morgan O-Rings for Pull Pins

Part Number: O-Rings-PP

Non-Return Vacuum Tester

All Helmets with O2 with Adapter Fitting

Part Number: DLMV8500

Knob Roll Pin Tool

for SuperFlow/350 Regulators

Part Number: DL-KRPT

Pliers Soft Jaw

(Proto)

Part Number: T-J253G

Dive Supervisor’s Guidebook

Only Partial Pages of Guidebook are Displayed

Part Number: DSGB

Part #	Hand Tools	Unit	Qty
525-620	Tool Kit w/ Pouch, for 17B, 17C, 27, 17K, KM-37SS, KM-37, KMB 18/28	Each	1
525-768	KM-77/47 Tool Kit w/Pouch	Each	1
325-630	EXOBR Tool Kit w/Pouch	Each	1
525-630	Tool Kit w/Pouch for KM-97, 455 Reg	Each	1
T-06227987	Torque Wrench, CDI / Snap on brand 30-250 in lbs	Each	1
T-4362	10 pc Crowfoot Wrench Set Craftsman 3/8″ – 1″	Each	1
T-401SMCDI	Torque Screwdriver, CDI / Snap on brand 5-40 in lbs & 4-27 NM	Each	1
T-FB-att-1-4	1/4″ Flat Blade Screwdriver Attachment for Torque Screwdriver	Each	1
T-Phl-att-2	#2 Phillips Screwdriver Attachment for Torque Screwdriver	Each	1
T-Att-7-64	7/64″ Allen Wrench Attachment for Torque Screwdriver	Each	1
T-Att-9-64	9/64″ Allen Wrench Attachment for Torque Screwdriver	Each	1
T-Att-5-32	5/32” Allen Wrench Attachment for Torque Screwdriver	Each	1
DL-PP-ORST	Pull Pin O-Ring Seating Tool	Each	1
T-02623544	3/32″ Pin Punch, Proto Brand	Each	1
T-06623805	Brass Hammer	Each	1
525-625	Regulator Nut Socket	Each	1
T-05054093	Allen Wrench 9/64 (T-Handle) (Bondhus), for pull pin	Each	1
T-Std-Allen	Allen Wrench 9/64 (Standard), also for Pull pin	Each	1
T-D809440	3/8″ Drive, Ratchet	Each	1
T-Ext-6IN	Extension for Ratchet, 6 inch	Each	1
T-ND-3-8	Nut Driver 3/8″ for pull pins	Each	1
T-ND-1-4	Nut Driver 1/4” for pull pins	Each	1
T-08100265	Pliers-CirClip-Int-Ext-(Proto), Regulator snap ring pliers	Each	1
T-J253G	Pliers Soft Jaw (Proto)	Each	1
T-9930	11 pc Stubby Comb Wrench Set 3/8″ – 1″	Each	1
T-2546	10 pc T-handle Hex Key Set 3/32″ – 3/8″	Each	1
T-TL111	O-Ring Picks, Bronze tips	Each	1
T-TL118	Spanner Wrench for scuba 1st stage 3/4″ – 2″	Each	1
T-3528	7/8 Inch Thin Wrench, (Proto)	Each	1
T-68805	1/4″ – 1-1/8″ Wrench Set	Each	1
T-45386	7/16″ Deep Socket 3/8″ Drive	Each	1
T-93943HF	Crescent Wrench Set, 6″,8″,10″	Each	1
T-Tap	0-1/4″ T-Handle Tap Wrench	Each	1
Tap-6-32	6-32 Hand Tap (4-flute), for SS Helmet snaps	Each	1
T-04417333	8-32 Hand Tap (4-flute), for face port insert tap	Each	1
Tap-10-24	10-24 Hand Tap (4-flute), for face port tap, SS helmets	Each	1
T-tweezers	Tweezers	Each	1

T-FB-driver	1/4″ Flat Blade “stubby” screwdriver, for side block alignment screw	Each	1
T-FB-3-8	Flat Blade Screwdriver	Each	1
T-Phl-8	Phillips Screwdriver	Each	1
T-NS-pl	Needle Nose Pliers	Each	1
T-200-002	Flush Cutters (cable tie)	Each	1
T-scribe	Metal Scribe	Each	1
T-PK	Putty Knife 1″ wide	Each	1
T-Acid Brush	Acid Brush	Each	1
T-09301680	Brass Brush	Each	1
Part #	Miscellaneous Items	Unit	Qty
T-HL-404-DLX	Regulator In-Line Shut Off, 2nd Stage	Each	1
DL-BP	Helmet Blanking Plate	Each	1
DL-KRPT	Knob Roll Pin Tool for SuperFlow/350 Regulators	Each	1
T-AC900	EZ QD Adapter (goes with T-AC380)	Each	1
T-AC380	Intermediate Pressure Gauge	Each	1
T-200-1400	Flow Meter, Range 200-1400 LPM for umbilical flow testing	Each	1
DL-EXO-kit	EXO Tool / Puck Kit	Each	1
T-TL121	Regulator In-Line Adjuster	Each	1
T-TB	Dive Lab Test Block	Each	1
T-1510 w/lid organizer	Pelican Case w/Mesh Lid Organizer	Each	1
DLMV8500	Non-Return Vacuum Tester, All Helmets, with O2 adapter fitting (Optional)	Each	1
DSGB	Dive Supervisor’s Guidebook	Each	1
Part #	Lubricants/Sealants	Unit	Qty
T-CL	Christo Lube – 2 oz, O2 compatible	Each	1
T-111	Valve Lubricant & Sealant Molykote, (Molykote from Dow Corning, 111 or equivalent	Each	1
T-PC71-9721	Tribolube 71 (2 oz tube) Oxygen compatible	Each	1
T-PC2080L97254T	Tribolube 2080 Light (4 oz tube) Silicone grease	Each	1
T-Loc248	Loctite Stick (Blue, Medium)	Each	1
T-RTV	100% Silicone RTV, 3 oz tube	Each	1
520-008-1	Silicone Oil (Dow Corning 550R) 1 ounce w/syringe, NO O-rings, (for pull pins)	Each	1
520-008-2	Silicone Oil (Dow Corning 550R) 2 ounce, w /syringe, NO O-rings, (for pull pins)	Each	1
O-Rings-PP	Kirby Morgan O-Rings for Pull Pins Includes: qty 2 P/N 510-112 (silicone-orange) & qty 1 P/N 510-008 (black)	Each	1